Description
HPV04801.110TPG Camtec AC/DC Switch Mode DIN RAIL TS35mm High Voltage 1-phase fix output 480W 115-230Vac 110Vdc 4.4A
DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
Temperature Control
Clean C/V chart without foldback, ideal for dc drives
ModelHPV04801
Power480W
Nominal AC Input115/230Vac select
Input Range AC90..115Vac/184..265Vac
Input Range DC250… 375Vdc
Input Frequency47… 63Hz
Hold-Up Time40ms
Inrush Current Protection NTC <40A
Manufacturer:Camtec
Datasheet:Camtec/hpv04801.pdf
The Camtec HPV series is a high precision switch mode power supply for an upscale demand. It is engineered and manufactured by CAMTEC in Germany. The designed meets challenging applications like complex dc- drives, piezo print head, test-stands, and professional machine-building. The power supply provides a low ripple-noise, a precise load-regulation and high efficiency up to 93%. High-end long-life capacitors guarantee an extended hold-up-time and an extraordinary lifetime of the power supply. The circuit design starts complex loads easily. The internal control circuit manages illegal operating conditions to prevent your system from damages. The HPV series features active high input transients with suppressor diodes, X2-capacitors and varistors. All inputs, outputs and feature connections are galvanic isolated. The design rules set value on extended interference immunity and safety. The unit is designed in accordance with the EN61010-1, EN61010-2-201, EN62368-1, EN60950-1 and the EMC-compatibility with EN55032.
The HPV power supply series realizes very high-
power efficiency in a space-saving housing. Latest
generation electrical devices relate to the high
reliability of all CAMTEC products. The CAMTEC
philosophy is, to employ 125°C low ESR ultra
long-life capacitors where expedient to achieve a
superior lifetime of the product. The HPV power
supply is made for high reliable and demanding
industrial applications, railway, infrastructure,
professional machine building, printing machines
and complex dc-drive up to precision piezo drives.
DC-ok Power Good Relay
The PG Relay connection indicates over
temperature, low DC-voltage at the output and low
AC supply voltage at the input.
Galvanic Isolation
The power supply is galvanic isolated between the
input and the output. All features like the Power
Good Relay are connected to the DC power
outputs.
Thermal shutdown
The HPV is featured with a thermal overload shut
down and auto recovery behaviour.
Over Voltage Protection
Ticker mode and auto recovery
hort Circuit Protection
A continuous short circuit does not cause damage to the
power supply. The HPV delivers constant current and 0
output voltage. It recovers automatically after the short
circuit is released.
Open Circuit Protection
The HPV series is continuously open circuit protected.
The device delivers a stable output voltage and no
current. If a load is immediately connected to the device,
the power supply stabilizes within 1ms. It does not
overshoot the output voltage.
Power Up Ramp
The devices have a soft start ramp when powering up.
The device does not either overshoot the voltage nor
does the output flutter – independent if a load is
connected or not.
Current Voltage Chart, CV & CC mode
The HPV series provides a perfect current voltage chart.
It has no fold back or other abnormalities. The output
voltage can drop down to zero volts when the power
supply is overloaded. The unit delivers a stable and
constant current to the outputs.
