Description
ebm-papst W3G800-NS26-71 Reliable, industrial fan High Power Cooling EC Fan AC400V 50/60Hz 930RPM 1570W 2.5A Axial
The ebm-papst W3G800-NS26-71 is a high-efficiency 800mm axial fan featuring advanced GreenTech EC (Electronically Commutated) motor technology. Designed for critical thermal management in industrial environments, this unit combines an optimized aerodynamic blade profile with intelligent motor electronics to deliver high airflow volumes at reduced noise levels. The integrated EC controller allows for precise speed modulation via 0-10V or PWM signals, enabling demand-dependent operation that significantly lowers energy consumption compared to conventional AC asynchronous motors. This model is specifically engineered for installation in condensers, chillers, and heat exchangers where reliability and electrical efficiency are paramount. Its robust construction incorporates maintenance-free ball bearings, ensuring longevity even under continuous duty cycles in harsh ambient conditions. The W3G800-NS26-71 serves as a vital component for facility managers looking to optimize the PUE of data centers or the operational costs of large-scale refrigeration plants.
Weight 40,1 kg
Motor size 150
Size 800 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted black
Blade material PP plastic
Fan housing material PP plastic
Material guide vanes PP plastic
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class “F”
Ambient temperature note If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. Further information can be obtained from ebm-papst. As fan only suitable for use with industrial evaporators
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) +70 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position See fitting instructions
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing with low-temperature lubricant
Technical features – Output 10 VDC, max. 10 mA – Operation and alarm display – External 24 V input (parameter setting) – External release input – Alarm relay – Integrated PID controller – Motor current limitation – PFC, passive – RS-485 MODBUS-RTU – Soft start – Control input 0-10 VDC / PWM – Control interface with SELV potential safely disconnected from the mains – Thermal overload protection for electronics/motor – Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC interference emission According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box with cable
Motor protection Reverse polarity and locked-rotor protection
Protection class assignment I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation.
Conformity with standards EN 61800-5-1 / CE / UKCA
Approval EAC
