Description
1188991 Loctite® Stycast L 28 Epoxy Unfilled Epoxy Impregnating and Laminating Resin, Clear Red Multi Purpose
Henkel Loctite STYCAST L 28 Clear Red, formerly Emerson and Cuming, is a two component, unfilled epoxy encapsulant that is used for impregnating, laminating, and encapsulating. 1 qt Can. STYCAST L 28 is a clear red, unfilled epoxy encapsulating and impregnating resin. It can be used with a wide variety of catalysts to yield various cured properties.
Typical Use: Used as an encapsulating and impregnating resin; it has also been used as a laminating resin in combination with glass cloth or mat.
Brand: STYCAST
Chemical Composition: Epoxy
Color: Red
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: Catalyst 9: 16 to 24h @ 25 °C; Catalyst 11: 8 to 16h @ 80 °C; Catalyst 24LV: 24h @ 25 °C
Dielectric Strength: Catalyst 9: 15.7 kV/mm; Catalyst 11: 15.7 kV/mm; Catalyst 24LV: 15.7 kV/mm
Flash Point: >93.3 °C
Hardness: Catalyst 9: 85 D; Catalyst 11: 87 D; Catalyst 24LV: 78 D
Mix Ratio: Catalyst 9: 100:14.5 by weight; Catalyst 11: 100:17 by weight; Catalyst 24LV: 100:29.5 by weight
Service Temperature: Catalyst 9: -40 to 130 °C; Catalyst 11: -55 to 155 °C; Catalyst 24LV: -65 to 105 °C
Specific Gravity: 1.17
Viscosity: Base:13,000
Volume Resistivity: Catalyst 9: >1 x 10^14 ohm-cm; Catalyst 11: >1 x 10^14 ohm-cm; Catalyst 24LV: >1 x 10^14 ohm-cm
Working Time: Catalyst 9: 45min; Catalyst 11: >4h; Catalyst 24LV: 30min
Series: Loctite® Stycast L 28
Type: Epoxy
Features: Clear Red
For Use With: Multi Purpose
Datasheet: henkel-loctite-adhesive-sourcebook.pdf
