Description
MT0500I Siemens Class MT Control Transformer, 380/400/415 VAC Primary, 110/220 VAC Secondary, 500 VA Power Rating, 60 Hz, 1 Phase, Chassis Screw Mount Box
Features
Epoxy encapsulated (50 to 750 VA), epoxy resin impregnated (1 to 5 kVA)
Completely seals the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
Fuse clips (most models), factory mounted for integral fusing on the secondary side to save panel space, save wiring time and save the cost of buying an add-on fuse block or kit
Integrally molded barriers, between terminals and transformer, protect against electrical creepage, up to 30% greater terminal contact area permits low loss connections, extra deep barriers reduce the chance of shorts from frayed leads or careless wiring
Terminals, molded into the transformer, are difficult to break during wiring, a full quarter-inch of thread on the #10-32 terminal screws prevents stripping and pullout
Jumpers supplied, two jumper links are standard with all transformers which can be wired for dual primary voltages
Laminations are built with silicon steel to minimize core losses and to increase optimum performance and efficiency
Insulation materials are of the highest rating available for the temperature class
Robust design
0.29 A max at 240 VAC
Siemens MT0500I Key Specs
Brand: Siemens
Part Number # : MT0500I
Dimensions: 5.39 in H x 5.25 in W x 5.91 in D
Primary Voltage: 380/400/415 V AC
Secondary Voltage: 110 x 220 V AC
UNSPSC: 39121026
UPC: 00754554027487
Primary Voltage: 380V, 400V, 415V
Secondary Voltage – (Full Load): 220V, 110V
Max Power: 500VA
Center Tap: No
Termination Style: Terminal Block
Size : 150.11mm L x 133.35mm W
Mounting Type: Chassis Mount
