Description
TM5SDO16T Schneider Electric / SquareD Transistor Discrete Output Module, 16 Outputs, Modicon TM5 Output Module 24VDC 16 Digital DIN Rail Screw Terminal for Modicon TM5 Series. This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. The digital output module provides 16 transistor outputs with source (negative) logic. It provides a discrete input voltage of 24V DC, an input current consumption of 56mA at 5V DC bus, 40mA at 24V DC. This product is part of a flexible and scalable I/O configuration for automation solutions. There is an insulation between channel and bus at 500Vrms AC and no insulation between channels. It is furnished with single wire for electrical connection. It is an IP20 rated product. It is furnished with single wire for electrical connection. It is an IP20 rated product. Its housing colour is white.It weighs 0.025kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.
Modicon™ TM5 for Sercos enables the complete integration of safe communication into standard communication
Safety solutions up to SIL 3 according to IEC 61508, Cat. 3, PL e according to ISO 13849-1, SILCL 3 according to IEC 62061
Integrated workbench tool (EcoStruxure™ machine expert motion/sosafe) for safety software solution
Wide range of I/O expansion modules – digital I/O, analog, expert, non-functioning dummy, remote I/O modules, touch probes (sercos)
Fully compatible with EcoStruxure™ machine expert software
Distributed I/Os via the sercos interface module for all PacDrive 3 controllers, including safe I/O communication and for Modicon™ LMC078 (only standard communication)
Combination of standard and safe I/Os on same I/O unit
Distributed I/Os via the CAN open interface module, or remote expansion via the local TM5 expansion bus on Modicon™ M258 and Modicon™ LMC058 controllers (PLC and PAC)
Safe I/Os and safe remote I/Os for integrating safety signal acquisition and safety dialogue
Modicon™ TM5 SLC safe logic controller (integrated as a Sercos slave) for programming the safety functions
Range of Product
Modicon TM5
Product or Component Type
Discrete output module
Product Compatibility
PacDrive LMC Pro
Motion controller
PacDrive LMC Pro 2
PacDrive LMC Eco
Logic controller
Range Compatibility
Modicon LMC058
PacDrive LMC motion controller
Modicon M258
Discrete output number
16
Discrete output logic
Source
Discrete output voltage
24 V DC 20.4…28.8 V)transistor
ComplementaryCurrent per channel
0.5 A
Maximum current per output common
8 A
Peak output current
3 A
Switching frequency
<= 500 Hz resistive
Response time
<= 300 µs from state 0 to state 1 output
<= 300 µs from state 1 to state 0 output
Discrete output number
16 transistor at 24 V DC
Maximum leakage current
5 µA 24 V DC when switched off
Maximum voltage drop
<2 V at 500 mA sensor supply
<0.1 V at 500 mA output
Typical current consumption
56 mA 5 V DC
40 mA 24 V DC
Electrical Connection
1 wire
Local signalling
1 LED (green/red) for power supply
16 LEDs (yellow) for output status
Height
3.9 in (99 mm)
Width
0.5 in (12.5 mm)
Depth
3.0 in (75 mm)
Product Weight
0.055 lb(US) (0.025 kg)
Electromagnetic compatibility
Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2
Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2
Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3
Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3
Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4
Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4
Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4
1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5
1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5
Conducted RF disturbances IEC 61000-4-6
Conducted and radiated emissions CISPR 11
EnvironmentIP Degree of Protection
IP20
Marking
CE
Product certifications
CSA
CULus
C-tick
GOST-R
Standards
IEC 61131-2
UL 508
CSA C22.2 No 213
CSA C22.2 No 142
Ambient air temperature for operation
14…131 °F (-10…55 °C) without derating horizontal installation)
14…140 °F (-10…60 °C) with derating factor horizontal installation)
14…122 °F (-10…50 °C) vertical installation)
Ambient air temperature for storage
-40…158 °F (-40…70 °C)
Relative humidity
5…95 % without condensation
Operating altitude
0...6561.68 ft (0...2000 m)
Pollution degree
2
Vibration resistance
1 gn 8.4…150 Hz) on DIN rail
3.5 mm 5…8.4 Hz) on DIN rail
Shock resistance
15 gn 11 ms
Ordering and shipping detailsCategory
US1PC1222532
Discount Schedule
PC12
GTIN
3595864145174
Returnability
Yes
Country of origin
AT
Packing UnitsUnit Type of Package 1
PCE
Nbr. of units in pkg.
1
Package 1 Height
0.787 in (2.000 cm)
Package 1 Width
2.362 in (6.000 cm)
Package 1 Length
4.173 in (10.600 cm)
Package weight(Lbs)
1.411 oz (40.000 g)
Unit Type of Package 2
S02
Number of Units in Package 2
97
Package 2 Height
5.906 in (15.000 cm)
Package 2 Width
11.811 in (30.000 cm)
Package 2 Length
15.748 in (40.000 cm)
Package 2 Weight
9.409 lb(US) (4.268 kg)
Contractual warrantyWarranty (in months)
18
Manufacturer PN: TM5SDO16T
Manufacturer: Schneider
