Description
SPW-3050 Series – 2.5 VA – Power Transformers – International Low Profile PC Mount (Economy)
Specifications
- Voltage rating cannot be approved under UL 1585
- Primary and secondary windings are designed to be used as one primary and one secondary winding with either parallel or series connection only.
| Description | Value |
|---|---|
| VA | 2.5 |
| Series | 230 V CT @ 10 mA |
| Parallel | 115 V @ 20 mA |
| Input | 115/230V |
Shrouded primaries/three flange bobbin design
No electrostatic shield required
Anchor, insulating and crossover tapes
^ Bobbin and shroud material rated UL94V0
^ Two distinct, separate windings for each primary and secondary assure excellent HIPOT capability between these windings
^ 4500 VRMS Hipot Pri – Sec
^ Immersed in 100% solids epoxy resin to withstand most aqueous and solvent cleaning systems
^ 100% Final Tested
^ Every single transformer is tested on automated panels for induced voltage (shorted turns), exciting current, open circuit voltage (turns ratio), polarity (phasing) and dielectric strength.
^ Class B Insulation System
^
Manufacturer:Electronic Components
Datasheet:FullLineCatalog.pdf
