Description
The EN25QH16 is a 16 Megabit (2,048 K-byte) Serial Flash memory, with enhanced write protection mechanisms. The EN25QH16 supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ 0 (DI), DQ 1 (DO), DQ 2 (WP#) and DQ 3 (HOLD#). SPI clock frequencies of up to 80MHz are supported allowing equivalent clock rates of 160MHz (80MHz x 2) for Dual Output and 320MHz (80MHz x 4) for Quad Output when using the Dual/Quad I/O Fast Read instructions. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction
The EN25QH16 is designed to allow either single Sector/Block at a time or full chip erase operation. The EN25QH16 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block .
SPECIFICATIONS
Mfr Package Description 5 X 6 MM, HALOGEN FREE, ROHS AND REACH COMPLIANT, VDFN-8
Status Active
Clock Frequency-Max (fCLK) 104.0 MHz
JESD-30 Code R-PDSO-N8
Memory Density 1.6777216E7 bit
Memory IC Type FLASH
Memory Width 8
Number of Functions 1
Number of Terminals 8
Number of Words 2097152.0 words
Manufacturer:Electronic Components
Datasheet:Others/EN25QH16A_Ver.C.pdf
