Description
The M100 series is a comprehensive range of AC and DC transducers providing a DC mA output proportional to its input signal.
With its isolation of 4kV combined with an accuracy to Class 0.2 allows the M100 series to be used with Building Management Systems, analogue and digital meters etc.
The M100 series has U.L. Approval.
TYPICAL APPLICATIONS
The M100 series voltage transducers are designed to measure A.C. Voltage in single and 3 phase system. They convert the A.C. Signal to a D.C. Output that is directly proportional to the input signal.
The M100-VA1 VA3 are self powered (i.e. no auxiliary required) average sensing RMS calibrated voltage transducers, mA and voltage outputs are available.
The M100-VL1 VL3 are average sensing RMS calibrated, live zero voltage transducers. Auxiliary is required to provide power so that 4mA output signal is present when the input is zero.
The M100-VR1 is true RMS sensing RMS calibrated allowing measurement of distorted waveforms of up to 9th harmonic with a crest factor of 5. The VR1 is typically used in voltage measurement where distorted waveform is common such as thyristor drives.
The above units are used to measure voltage in energy management systems, switchboards, generator and telemetery controls. Isolation of 4kV is provided between the input and output signal, allowing the ouput to be fed to conventional analogue meters, digital meters, PLC, and computer systems.
Manufacturer:Electronic Components
Datasheet:ds_M100_v.pdf
