Description
RS209 S-Conn Connector RP SMA R/A Jack PCB Mount Type
Applications
• Spread Spectrum Wireless Devices
Features
• These connectors may also be used in applications where keying is a necessity. The RP SMAs meet the same high quality requirements as S-Conn’s standard SMAs. They provideexcellent performance DC 18GHz for RP-SMAs.
| Electrical |
|
Impedance |
50Ω |
|
Frequency Range |
0 to 18 GHz |
|
VSWR |
≤1.2 + .03f (GHz) |
|
RF Leakage |
≥60 dB |
|
Dielectric Withstanding Voltage |
1000 V rms |
|
Voltage Rating |
≥500 V rms (depending on cable) |
|
Inner Contact Resistance |
≤3 mΩ |
|
Outer Contact Resistance |
≤2.5 mΩ |
|
Insulation Resistance |
≥5 GΩ |
| Mechanical |
|
Mating |
1/4-36 UNS Screw-on Coupling |
|
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
|
Recommended Mating Torque |
7.1 lbs ~ 9.7 lbs |
|
Coupling Nut Retention Force |
≥60.7 lbs |
|
Cable Retention Force |
≥ 7.3 lbs (for RG178) |
| Material |
|
Parts Name |
Material |
Plating |
|
Body |
Stainless steel |
Passivated or Gold |
|
Inner Contact |
Male: Brass |
Gold |
|
Insulator |
PTFE |
None |
|
Gasket |
Silicone Rubber |
None |
|
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.
S-Conn set up in 1990. S-Conn’s major line is related metal and plastic parts for RF connector at initial stage. Through efforts of S-Conn’s staff with accumulating experience, S-Conn can make RF connectors and cable assemblies from OEM to ODM. A broad arrange of RF connectors to meet the demand from different application from either telecommunication or broadcasting.
Manufacturer:Electronic Components
Datasheet:Others/RS209L0G27.pdf
