Description
Dow Corning 3-1965 Conformal Coating Clear is a one component, low viscosity solvent free coating that is used for print wire boards, circuit boards, and other sensitive electronic components. It cures at room temperature, offers stress relief, and is environmentally friendly. 3.6 kg Pail.
| Typical Use: | Protective coating for rigid and flexible circuit boards. These fast curing, one-part, self-priming coatings cure to flexible, transparent elastomers ideally suited for electronic printed wiring board (PWB) applications. |
| Color: | Clear |
| Components: | 1 part |
| Cure System: | RTV/Heat |
| Cure Time: | 30min @ room temperature; 2min @ 60 °C |
| Dielectric Strength: | 450 V/mil |
| Hardness: | 29 A |
| Key Specifications: | MIL-I-46058C If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distributor. |
| Service Temperature: | -45 to 200 °C |
| Specific Gravity: | 0.99 |
| Tack Free Time: | 7min |
| Viscosity: | 125 |
| Volume Resistivity: | 5.7e + 14 ohm-cm |
Manufacturer Part Number: 3-1965-PAIL
What is DOWSIL™ 3-1965 Conformal Coating?
One-part, transparent, moisture cure conformal coating intended for use in printed circuit board assemblies (PCBA). DOWSIL™ 3-1965 Conformal Coating is a low viscosity, stress relieving, no solvent added coating that is UL, IPC, and MIL recognized.
Uses
Environmental protection
Corrosion resistance
Dielectric protection
Thin-section encapsulation
Benefits
Room temperature or heat-accelerated cure
Viscosity: 115 cps
Hardness: 33 Shore A
Contains UV indicator
No added solvents
UL 94 V-0, UL 746C, UL 746E
IPC-CC-830
MIL-I-46058C
