Description
APL5915KAI-TRL Anpec IC LINEAR D ROP REG ADJ 0.2V@1.5A SM 0.8 V-3.3 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.3 V DROPOUT, PDSO8
Features
Ultra Low Dropout at 1.5A Output Current Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC)) Applicable 0.8V Reference Voltage High Output Accuracy – ±1.5% over Line, Load, and Temperature Fast Transient Response Adjustable Output Voltage by External Resistors Power-On-Reset Monitoring on both VCNTL and VIN Pins Internal Soft-Start Current-Limit Protection Under-Voltage Protection Thermal Shutdown with Hysteresis Power-OK Output with a Delay Time Shutdown for Standby or Suspend Mode Simple SOP-8P Package with Exposed Pad Lead Free and Green Devices Available (RoHS Compliant)
The a 1.5A ultra low dropout linear regulator. This product is specifically designed to provide well supply volatage for motherboards NB and VGA card applications. The IC needs two supply voltages, a control voltage for the circuitry and a main supply voltage for power conversion, to reduce power dissipation and provide extremely low dropout. The APL5915 integrates many functions into a single package. A Power-On-Reset (POR) circuit monitors both supply voltages to prevent wrong operations. Thermal shutdown and current limit functions protect the device against thermal and current over-loads. POK indicates the output status with time delay which is set internally. It can control other converter for power sequence. The APL5915 is enabled by other power system. Pulling and holding the EN pin below 0.3V to shuts off the output. The APL5915 is available in SOP-8P package which features small size as SOP-8 and an Exposed Pad to reduce the junction-to-case resistance, being applicable in 1~2W applications.
Applications
Note Book PC Applications Motherboard Applications VGA Card Applications
SOP-8P (Top View) = Exposed Pad (connected to VIN plane for better heat dissipation)
Assembly Material Handling Code Temperature Range Package Code Package Code : SOP-8P Operating Ambient Temperature Range ° C Handing Code TR : Tape & Reel Assembly Material L : Lead Free Device G : Halogen and Lead Free Device XXXXX – Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight).
Manufacturer Part Number: APL5915KAITRL
Specifications
Regulator Type Low Dropout
Output Polarity Positive
Output Voltage Type Adjustable / Variable
Package Type Other, GREEN, MS-012BA, SOP-8
Life Cycle Stage ACTIVE
Output Voltage 0.8000 to 3.3 volts
IOUT 1.5 amps
Dropout Voltage 0.3000 volts
