Description
DP-2-63 TE Connectivity TE Connectivity DuraSeal Series Red Insulated Crimp Receptacle, 6.35 x 0.8mm, 0.5mm to 1mm, 22AWG to 18AWGFrom TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Red 0.25 – 1.6 mm2
Blue 1.0 – 2.6 mm2
For appropriate Crimps see RS 680-2063, RS 680-2893, RS 680-5876
UL Approvals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm – 6.0mm, they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm to 6.0mm.
Voltage Rating 600 V Insulation Material Nylon
Temperature Range -55C to +125C Dielectric Strength 7.5kV
Terminal Material High Grade Copper Insulation Resistance 10 MO
Approvals
UL Listed
Specifications
Series Duraseal
Insulation Insulated
Insulation Material Nylon
Minimum Wire Size mm 0.5mm
Gender Female
Maximum Wire Size mm 1mm
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 18AWG
Tab Size 6.35 x 0.8mm
Colour Red
Manufacturer Part Number: DP-2-63
Manufacturer: TE Connectivity
