Description
15BHCL-400E Eaton Bussmann series 15BHCL fuse, 15.5 kV, 300A, E-rated, BHCL, Triple-barrel
Mfr: Eaton – Bussmann Electrical Division
Mounting Type: Bolt Mount
Fuse Type: Cartridge
Current Rating (Amps): 400A
Voltage Rating AC: 15.5 kVAC
Breaking Capacity @ Rated Voltage: 50kA
Features:
Size / Dimension:
Datasheet: 15BHCL-400E
Features and benefits
• Current-limiting E-Rated medium voltage
fuses are defined by their melting time-current
characteristic that permit their electrical
interchangeability with other fuses of the same
E Rating.
• E-Rated fuses must have a defined current
response time specified by ANSI C37.46.
E-Rated fuses of 100 amps and below must
melt in 300 seconds at an RMS current within
the range of 200% to 240% of the fuse’s
nameplate current rating. E-Rated fuses greater
than 100 amps must melt within 600 seconds
at an RMS current in the range of 220% to
264% of the fuse’s nameplate current rating.
• E-Rated fuses are physically dimensioned for
easy installation in existing hardware.
• Current-limiting fuses provide positive
interruption even on low fault currents. The
fuse limits the magnitude of electromechanical
stresses in the protected apparatus.
• Constructions available in ferrule, bolt-on
and clip-lock, and specialty mount fuses for
AMPGARD motor starters.
• Outdoor rating available on select catalog
numbers (requires installation in a suitable
enclosure).
• Open fuse indicator speeds troubleshooting
by providing a positive visual indication of fuse
operation.
• 50/60 Hz operating frequency for worldwide
application.
• Mountings are available in disconnect and non-
disconnect versions with porcelain or glass poly-
ester insulators
