Brightking TVS Diodes

Active Components > TVS Diodes

Brightking TVS Diodes

TVS (Transient Voltage Suppressor) diodes are semiconductor devices designed to protect electronic circuits from voltage spikes and surges. They work by clamping excess voltage to a safe level before it reaches sensitive components. TVS diodes, built using diode technology, conduct in one direction and offer protection against threats like electrical fast transients (EFT), electrostatic discharge (ESD), inductive load switching, and even lightning.

Types and Characteristics TVS diodes come in two configurations:

  • Unidirectional: Protects against voltage spikes in one direction.
  • Bidirectional: Clamps voltage spikes from either direction.

Key parameters to consider when selecting TVS diodes include:

  • Reverse Standoff Voltage (VR): The maximum voltage the diode can handle without conducting.
  • Peak Pulse Current (IPP): The highest current the diode can conduct during a surge.
  • Maximum Clamping Voltage (VC max): The voltage level at which the diode begins to conduct during a transient.

Applications TVS diodes are widely used for overvoltage protection in:

  • MOS memory
  • Microprocessors
  • Telecommunication equipment
  • AC power lines
  • Consumer electronics

These diodes are particularly advantageous over standard diodes due to their larger P-N junction, which allows them to conduct higher currents safely. Their rapid response time ensures quick suppression of voltage spikes, minimizing potential damage to circuits.

Brightking’s TVS diode range provides reliable protection for integrated circuits, keeping your electronic devices safe from voltage transients and surges.

Brightking TVS Diodes

Series

ATS Series

Introduction: Glass passivated junction
Low inductance
Excellent clamping capability
10000W peak pulse power capability at 10/1000 μs waveform,
repetition rate (duty cycle): 0.05%
Fast response time
High Temperature soldering guaranteed : 265 ?/10 seconds /.375″
(9.5mm) lead length, 5lbs (2.3kg) tension
Plastic package has underwriters laboratory flammability 94V-0
Meets MSL level 1, per J-STD-020

1.0SMB-AT Series

Introduction: Case:   DO214AA
Power:  1000W
Reverse Stand-Off Voltage:  5.8~58.1V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps

P6KE-AT Series

Introduction: Case:DO-15
Power:600W
Reverse Stand-Off Voltage: 5.8~512V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps

P4KE-AT Series

Introduction: Case:DO-41
Power:400W
Reverse Stand-Off Voltage: 5.8~467V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps

SMAJ Series

Introduction:Case:   DO214AC

Power:  400W
Reverse Stand-Off Voltage:  5.0~440V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps

1.5KE-AT Series

Introduction: Case:DO-201
Power:1500W
Reverse Stand-Off Voltage: 5.8~467V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps

3KP-AT Series

Introduction: Case:P600
Power:3000W
Reverse Stand-Off Voltage: 5.0~220V
Fast response time: typically less than 1.0ps
Glass passivated junction
Excellent clamping capability

5KP-AT Series

Introduction: Case:P600
Power:5000W
Reverse Stand-Off Voltage: 5.0~250V
Glass passivated junction
Excellent clamping capability
Fast response time:typically less than 1.0ps