Description
1708-00-3835 ITW Fastex MICRO PUSH PIN .144-.154 HOLE .265-.290 RoHS
This one-piece fastener is ideally suited for fastening electronic components to printed circuit boards, mounting cooling fans to computer chassis / electrical boxes and finger guards to cooling fans. Molded in a durable, heat stabilized, impact modified nylon material, this unique design allows the part to draw panels together as a screw would, and hold the panels tightly to each other.
PANEL FASTENERS – PLASTIC RIVETS
PUSH-IN AND PULL-OUT TESTING
Testing Procedure: Performed on a Tinius Olsen 5000 Tensile Tester. The anvil arm that pushed and pulled each part traveled at a constant rate of 2.5 inches/minute. Tests performed at room temperature. Each test value represents the average of 20 pieces. Parts are dry as molded.
Note: The stated performance values represent typical values only. They are designed as a guideline for end users and are not specification values. Values stated will vary depending on the hole diameter, panel thickness, temperature, material and application. Users should conduct their own tests under specific actual conditions to determine the suitability of the fastener for a specific application.
Part Number: 231-080551-05-2099
Total Panel Thickness: .110″
Hole Diameter:.130″
| PANEL TYPE | PUSH-IN | PULL-OUT |
| Metal Panels | 17.5 lbs. | 37.0 lbs. |
| Plastic Panels | 10.5 lbs. | 30.0 lbs. |
Part Number: M-26-0396-01
Total Panel Thickness: .118″
Hole Diameter: .156″
| PANEL TYPE | PUSH-IN | SHEAR |
| Metal Panels | 50 lbs. | 78 lbs. |
Part Number: 1708-00-3835
Total Panel Thickness: .270″
Hole Diameter: .168″
| PANEL TYPE | PUSH-IN | PULL-OUT |
| Metal Panels | 11.5 lbs. | 52.0 lbs. |
| Plastic Panels | 9.5 lbs. | 40.0 lbs. |
R-Lok Plastic Expansion Rivet
Part Number: M26-0500-18
Total Panel Thickness: .118″
Hole Diameter: .197″
| PANEL TYPE | PUSH-IN | SHEAR |
| Metal Panels | 75 lbs. | 100 lbs. |
Part Number: 1116-17-2099
Total Panel Thickness: .195″
Hole Diameter: .168″
| PANEL TYPE | PUSH-IN | PULL-OUT |
| Metal Panels | 11.0 lbs. | 68.0 lbs |
| Plastic Panels | 10.0 lbs. | 58.0 lbs. |
Part Number: M26-0630-02
Total Panel Thickness: .131″
Hole Diameter: .248″
| PANEL TYPE | PUSH-IN | SHEAR |
| Metal Panels | 110 lbs. | 190 lbs. |
R-TITE RIVET PULL-APART TESTING
Part Numbers: P69-0500-02 and P69-0500-02
Testing Procedure: Straight pull apart test on Tinius Olsen Tensile Tester. Fully Assembled.
Pull Apart Speed: 2.51 ipm
Average Pull-Apart Force: 80.22 lbs.
Manufacturer Part Number: 1708-00-3835
ITW
