Description
2838 Heyco Shorty Bushings, 1.093″ Mounting Hole, Black RoHS
For use in panels .062″ (1,6 mm) and thinner. Lower overall height protrudes less through thin mounting panels; thus Shorty Bushings occupy less “real estate” inside your application. Insulating feed-thru bushings for limited internal clearance minimum .125″ (3,2 mm) applications. Insulate and isolate electric or telecommunications cables as well as low RPM shafts and push-pull rods. Locking fingers hold securely after only fingertip pressure snap-in installation. Locking fingers in fractional increments up to the maximum panel thickness.
Specifications
Description : B 1093-969
Mounting Hole Diameter (in.) : 1.093
Mounting Hole Diameter (mm) : 27.8
A- Inside Diameter (in.) : 0.97
A- Inside Diameter (mm) : 24.6
B- Head Diameter (in) : 1.16
B- Head Diameter (mm) : 29.4
C- Overall Height (in.) : 0.26
C- Overall Height (mm) : 6.5
Lower overall height protrudes less through thin mounting panels; thus Shorty Bushings occupy less “real estate” inside your application.
Insulating feed-thru bushings for limited internal clearance (minimum .125″ or 3,2 mm) applications.
Insulates and isolates electric or telecommunications cables as well as low RPM shafts and push-pull rods.
Locking fingers hold securely after only fingertip pressure snap-in installation.
Locking finger steps are designed at fractional increments to accommodate panel thicknesses less than the maxiumum .062″ (1,6 mm)
Available in multiple sizes for use in mounting holes from .187″ to 1.093″ (4,7 mm to 27,8 mm).
An assortment of sizes
Manufacturer: Electronic Components
MFG Part #: 2838
