Description
These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!
Silicone fan gaskets are truly the ultimate in fan noise reduction, because they perform two important tasks:
Help to ‘seal’ the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore air pressure losses, and
Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing.
Other advantages include:
Compatible with virtually all case cooling fans
Supplied with screws and silicone washers
Quick and very easy to fit (these gaskets ‘hold onto’ the fan whilst fitting them due to a small lip in the gasket design)
The following models are available:
AFG40B – Black, for 40mm case fans
AFG60B – Black, for 60mm case fans
AFG70B – Black, for 70mm case fans
AFG80B – Black, for 80mm case fans
AFG92B – Black, for 92mm case fans
AFG120B – Black, for 120mm case fans
Technical Specifications
Operating Temperature: (-)20 – (+)70C
Softness: Shore A 25 5
Material: Translucent Silicon Rubber
Gasket Thickness: 2.5mm
Recommended Compression: 5% of height
Manufacturer Part Number: AFG120B
Electronic Components
