Description
Ametherm Inrush Current Limiters ICL 8mm 5ohms 3A Thermistor
Manufacturer: Ametherm
Product Category: Inrush Current Limiters
RoHS: RoHS Compliant Details
Current Rating: 3 A
Voltage: 120 VAC
Resistance: 5 Ohms
Tolerance: 20 %
Case Diameter: 8 mm
Case Width: 4 mm
Series: MiniAmp
Brand: Ametherm
Dimensions: 8 mm Dia. x 4 mm W
Lead Diameter: 0.5 mm
Lead Spacing: 5.1 mm
Packaging: Bulk
Pitch Spacing: 1.5 mm
Factory Pack Quantity: 50
Type: Inrush Current Limiter Thermistors
Features, Applications
Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Not Available
For example: to order an inside kinked lead use part number SL08 5R003-A
Resistance @ 25°C Max Steady State Current to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance 100% of Max Current Resistance 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type 9.0mW/°C 20 seconds “B”
Thermistors are resistors that change of resistance with a change in temperature. Good qualities of thermistors are a predictable, accurately known resistance value at every temperature in its operating range. The lowering, or rise, depends on the type of thermistor per degree Kelvin (or Celcius, if you prefer), this is called its coefficient. Positive thermal coefficient (PTC) will increase in resistance with an increase in temperature, negative ones (NTC) will decrease.
Manufacturer:Ametherm
Datasheet:SL08 5R003.pdf
