Description
This IDC20 breakout board brings all 20 pins of its male dual row header out to screw terminal blocks, providing quick and secure connections. Each pin is also brought to solder pads (3 per pin) at 0.1″ (2.54mm) spacing, allowing the easy addition of pin headers. The solder pads are arranged in such a way that you can add an additional 2×10 header to the breakout board to bring all the signals back out on a ribbon cable if so desired (essentially forming a “T” or “Y” connection). Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding terminal block position; no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to additional headers or other components.
Dual row 0.1″ spaced male pin header
20 Pins (2 x 10) 0.1″ pitch
Ejector latches on header provide secure connection and quick disconnection
Screw terminal for each of the 20 lines
Solder pad connection holes, three (3) per pin
Supports addition of 0.1″ pitch pin headers
Screw terminals accomodate wire sizes from 16AWG to 26AWG
Approximate dimensions: 2.38″ x 3.9″
DIN rail mount
Manufacturer:Electronic Components
Datasheet:brk2x10-rev-a.pdf
