Description
OHMITE D25K15K Resistor 15 kOhms 25W Slide Adjustable Power Resistor Chassis Mount 0.563″ OD, 0.313″ ID (14.30mm x 7.94mm) 2.000″ (50.80mm) Length
Specifications
Product Category: Wirewound Resistors – Chassis Mount
Manufacturer: Ohmite
RoHS: No
Resistance: 15 kOhms
Power Rating: 25 W
Tolerance: 10 %
Temperature Coefficient: 260 PPM / C
Operating Temperature Range: + 25 C to + 350 C
Brand: Ohmite
Diameter: 14.3 mm
Length: 50.8 mm
Packaging: Bulk
Product: Power Resistors Wirewound Vitreous Enamel
Series: 210
Factory Pack Quantity: 1
Termination Style: Solder Lug
Tradename: Dividohm
Type: Vitreous Enamel Adjustable Power
Voltage Rating: 625 V
Resistance Value (Ohm) 15K Resistance Value describes the ratio of the potential of an electrical current applied to a given conductor to the current intensity value.
Tolerance 10% Tolerance describes the deviation from nominal value in percent.
Maximum Voltage Rating (V) 625 Maximum Voltage Rating describes the maximum value of D.C. voltage or A.C. voltage capable of being applied continuously to a resistor at the rated ambient temperature. Rated Voltage shall be calculated from the following formula. Rated Voltage(V) = {Rated Power(W) * Nominal Resistance()} When the nominal resistance value exceeds the critical resistance value, the rated voltage is limited to the maximum working voltage.
Power Rating (W) 25 Power Rating is a measurement of the amount of power that can be used with a specific tool or device.
Technology Wirewound Technology describes the technology type of manufacturing the device.
Temperature Coefficient (ppm/°C) ±260 Temperature Coefficient describes the rate of change in capacitor value per 1°C in the prescribed temperature within the range of capacitor operating temperature.
Temperature Range @ Derated Power (°C) 25 to 350 Temperature Range @ Derated Power describes the rate of change in temperature that the power derate from maximum load to zero load.
Case Style Vitreous Enamel Case Style describes the method used for product insulation.
Termination Style Radial Lug Termination Style describes the shape of pins, leads, terminals or connectors to show the way of its termination to a wire or PCB.
Number of Terminals 2 Number of Terminals describes number of package pins or device leads.
Package Shape Tubular Package Shape describes the shape of the device package.
Product Diameter (mm) 14.3 Product Diameter describes The device diameter.
Product Length (mm) 50.8 Product Length describes the overall length dimension in the length direction.
Mounting Bolt-On Mounting indicates the method of mounting the device.
Manufacturer Part Number: R2166
Manufacturer: Ohmite
