Description
G-APEX LFEP0165 Heat shrinkable tube for protection of glass lamp
LED / Fluorecent lamp protection sleeve
Application
LFEP made by FEP material with highly transparency and high strength. Apply in fluorescent lighting, LED glass lamp for preventing the problem of broken glass and splash, especially suitable for the industry, such as food processing , pharmaceutical factory, restaurants and public place. It provides full protection for lamp tube against outer impact, and avoid personnel injury by splash of broken glass for safety. Also lower the costs of old-style protective lighting.
Features
Shrinkage ratio: 1.25:1
Transmission rate is up to 95%
UV resistance
Excellent weather resistance and chemical resistance property
Flame-retardant, Non-contamination.
Non-splash of lamp glass when drop from 6M height to the ground
Operating Temperature Range
Operating temperature : -65? ~ 200?
Minimum shrink temperature : 60°C
Minimum fully recovery temperature : 120°C
Preservation temperature: below 50?
Color
clear,Other colors on demand provided
Specifies the size, according to customer demand for the crop specific requirements provided separately
|
Part Number |
Lamp Size |
As supplied (mm) |
After recovered (mm) |
|
|
I.D.(min) |
W.T |
I.D.(max) |
||
|
LFEP0165 |
T5 (15.5) |
16.5 |
0.20±0.05 |
13.8 |
|
LFEP0295 |
T8 (25.5) |
29.5 |
0.20±0.05 |
24.0 |
|
LFEP0340 |
T10 (32.5) |
34.0 |
0.20±0.05 |
30.5 |
|
LFEP0400 |
T12 (38.0) |
40.0 |
0.20±0.05 |
36.5 |
|
Property |
Specification Requirement |
Typical Value |
|
Elongation at break |
ASTM D2671 |
300% |
|
Elongation |
ASTM D638 |
200% |
|
Coefficient of friction |
ASTM D1894 |
0.2 |
|
Flame Rating |
UL94 |
V-0 |
|
Water Absorption |
ASTM D570 |
0.01% |
|
Melting Point |
ASTM 2116 |
250~280? |
|
Dielectric strength |
ASTM D2671 |
50~80kv/mm |
|
Voltage Resistivity |
ASTM D876 |
1015Ω.cm |
Manufacturer Part Number: LFEP0165
Manufacturer: Electronic Components
