Description
MidNite Solar MNEDC250 250 Amp Panel Mount DC Circuit Breaker, 125 VDC 3/8″ stud connections.
These are stud terminal single-pole panel-mount breakers that involve ring terminals on the wires connected to them (except the two items with lugs). In the Conext XW+ Distribution Panel, breakers up to 80 A can be used. OutBack Power FLEXware enclosures and MidNite E-Panels support 100 A and larger DC breakers. Only 125 VDC is recommended (except the 60 A lug breaker, which is rated at 160 VDC). Remote trip breakers ending in “RT” are MidNite breaker models that can be used with the MNBDM for a rapid shutdown.
The Midnite Solar 250A Battery Breaker is rated to break the full rated load at the rated voltage repeatedly with no damage and can be used at 100% rated current when mounted in a MidNite enclosure.
All MidNite circuit breakers are rated for 100% continuous duty. MidNite breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Breaker Torque Value 15 Ft-Lbs (20.4NM)
Circuit breakers are an important component of the solar system. Between Direct Current and Alternating Current, it serves as a barrier. A barrier between the panels and the alternating current is necessary for installation and routine maintenance. Electric protection requires the use of circuit breakers.
