Description
OutBack Power PNL-125-DC Front Panel Mount Circuit Breaker 125A Single Pole with stud terminals on the back. Ring terminals required.
OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce the time of installation and meet local electrical codes. It is our goal to engineer and build attractive, flexible and well designed integration hardware that is built to last.
The distance between the holes on the front of the breaker from center to center is 55 mm or 2 3/32 inches. The distance between the mounting screws on the rear of the breaker from center to center is 50mm or 1 15/16 inches.
Product Highlights
Panel mounted hydraulic-magnetic type breakers
Rated for 100% continuous duty cycle
Not affected by high ambient temperatures
Non-polarized for use in any wiring orientation
Can be used for input, output or load circuits
Contact OutBack for additional information
Technical Specifications
Hydraulic-magnetic type breakers
Can be used for input, output or load circuits
Variations
PNL-1-AC/DC: 1 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-5-AC/DC: 5 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-10-AC/DC: 10 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-15-AC/DC: 15 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-20-AC/DC: 20 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-30-AC/DC: 30 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-30-AC: 30 Amp, 250VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-40-AC/DC: 40 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-50-AC/DC: 50 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-60-AC/DC: 60 Amp, 150VDC and 120VAC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-80-DC: 80 Amp, 150VDC, 1/4″ stud terminals, Width is 0.75″ or 19mm
PNL-100-DC: 100 Amp, 125VDC, 5/16″ stud terminals, Width is 1″ or 26mm
PNL-125-DC: 125 Amp, 125VDC, 5/16″ stud terminals, Width is 1″ or 26mm
PNL-175-DC: 175 Amp, 125VDC, 3/8″ stud terminals, Width is 1.5″ or 39mm
PNL-250-DC: 250 Amp, 125VDC, 3/8″ stud terminals, Width is 1.5″ or 39mm
