Description
RED00202.T MODEL A CAMTEC Active N+1 Dual Redundancy Management Module 2x 50A Integrated low / overvoltage detection, Input/Output Floating RoHS
Manufacturer Part Number: RED00202.TA
N+1 Power Redundant Module DIN-Rail TS35mm
Continuous 2x 1000W (Input Channels), 1x 1000W total output
Lower voltage margin adjustable
Input & Output = floating
Decoupling Diode = fast Schottky
Voltage drop typ. 500mV
Manufacturer: Camtec
When breakdowns cost a lot of money and service is hindered, it is advisable to operate
the power supply management redundant. The redundant module RED00202 is
designed for applications from 12Vdc to 125Vdc. DC-outputs from n+1 power supply
units (equal power supplies and output voltages are recommended) will be decoupled. If
a breakdown occurs to one of the connected power supply modules, the other one will
take over without a voltage drop to the system. While normal operation the load will be
partitioned equal to each of the connected power supplies. The RED00202 power good
relay (change over contact) features continuous control over the conditions of the
connected power supplies. If one power supply fails the relay indicates that the
remaining power supply takes over. The lower control margin Vu can be adjusted via
front-sided control potentiometer ADJ. The upper margin Vo is a fixed value (see table).
The DC-Input of the RED00202 corresponds to the output voltage of the power supplies
installed. The GND-Input of the RED00202 is evident for the own supply only. The
voltage drop down between DC-input and DC-output is 500mV.
