Description
ebm-papst S3G350-ZH05-H1 Reliable, industrial fan High Power Cooling EC Fan Fan: EC; axial Ø460×211.7mm; 230VAC; ball; 2200rpm; IP55; black
Part # Alias: S3G350ZH05H1
Weight 6,3 kg
Motor size 84
Size 350 mm
Rotor surface Painted black
Terminal box material PP plastic
Electronics housing material Die-cast aluminum, painted black
Impeller material PP plastic, galvanized sheet-metal plate
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class “F”
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing / (sealed)
Technical features – Output 10 VDC, max. 10 mA – Operation and alarm display – Alarm relay – Integrated PID controller – Power limiter – Motor current limitation – PFC, active – RS-485 MODBUS-RTU – Soft start – Control input 0-10 VDC / PWM – Control interface with SELV potential safely disconnected from the mains – Thermal overload protection for electronics/motor – Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3 (household environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Thermal switch auto reset, internally connected
Protection class assignment I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation.
Conformity with standards EN 61800-5-1 / UKCA / CE
Approval UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1
Nominal data
Phase 1~
Type of voltage AC
Nominal voltage in V 230
Nominal voltage range in V 200 .. 277
Frequency in Hz 50/60
Type of data definition maximum load
Speed in min-1 2200
Power input in W 500
Current draw in A 2,2
Max. back pressure in Pa 350
Max. ambient temperature in °C 60
Datasheet: ebm_papst-S3G350ZH05H1
