Description
TPS-125-8 PEM Penn Engineering Self-Clinching Pin, Panel Thickness:.040 Min.^Hole Size: .144 in., Length: .205 in. RoHS
PEM self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. TPS, TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy Flush-head for sheet thickness of .040 and greater. Satisfies a wide range of positioning, pivot, and alignment applications. Chamfered end makes mating hole location easy. Type TPS recommended for use in steel or aluminum sheets HRB (Rockwell ; Scale) 70 or less and HB (Hardness Brinell) 125 or less. Type TP4 recommended for use in stainless steel sheets HRB (Rockwell ; Scale) 92 or less and HB (Hardness Brinell) 195 or less.
PEM self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
TPS, TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy
Flush-head for sheet thickness of .040 and greater.
Satisfies a wide range of positioning, pivot, and alignment applications.
Chamfered end makes mating hole location easy.
Type TPS recommended for use in steel or aluminum sheets HRB (Rockwell B Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Type TP4 recommended for use in stainless steel sheets HRB (Rockwell B Scale) 92 or less and HB (Hardness Brinell) 195 or less.
Specifications
Pin Dia. Code:125
Length Code:8
Min. Sheet Thickness:.040 in
Hole Size in Sheet + .003 – .000.144 in
P – Pin Diameter .002.125 in
L – Length .015.500 in
D .006.090 in
H .015.205 in
S Max.1.090 in
Min. Dist. Hole C/L to Edge.250 in
For Use in Sheet HardnessHRB 70 / HB 125 or Less
Fastener Material300 Series Stainless Steel
Standard Finish:Passivated and/or tested per ASTM A380
Manufacturer:Electronic Components
Datasheet:TPS-125-8-Self-ClinchingPilotPins.pdf
