Description
ebm-papst W3G630-NR63-01 Reliable, industrial fan High Power Cooling AC Fan 400VAC 1.8A 1150W Axial Cooling Fan
Brand： ebm-papst
Part No： W3G630-NR63-01
Fan Type： ebm-papst
Rated Voltage(V)： 400
Size(mm)： 630
Max.Air Flow(m³/h)： 7775
Max.Pressure(Pa)： 240
Input Power(W)： 1150
Speed(RPM)： 1260
Noise(dB)： 80
Weight: 24.3 kg
Motor Size: 112
Rotor Surface: Painted black
Terminal Box Material: PP plastic
Electronics Housing Material: Die-cast aluminum, painted black
Impeller Material: PP plastic
Fan Housing Material: Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard Grille Material: Steel, coated with black plastic (RAL 9005)
Number of Blades: 5
Blade Pitch: 0°
Airflow Direction: V
Direction of Rotation: Clockwise, viewed toward rotor
Degree of Protection: IP55
Insulation Class: “F”
Moisture (F) / Environmental (H) Protection Class: H2
Ambient Temperature Note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Max. Permitted Ambient Temp. for Motor (Transport/Storage): +80 °C
Min. Permitted Ambient Temp. for Motor (Transport/Storage): -40 °C
Installation Position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation Drainage Holes: On rotor side
Mode: S1
Motor Bearing: Ball bearing; (sealed)
Technical Features: – Output 10 VDC, max. 10 mA
– Operation and alarm display
– External 24 V input (parameter setting)
– Alarm relay
– Integrated PID controller
– Motor current limitation
– PFC, passive
– RS-485 MODBUS-RTU
– Soft start
– EEPROM write cycles: 100,000 maximum
– Control input 0-10 VDC / PWM
– Control interface with SELV potential safely disconnected from the mains
– Thermal overload protection for electronics/motor
– Line undervoltage / phase failure detection
EMC Immunity to Interference: According to EN 61000-6-2 (industrial environment)
EMC Interference Emission: According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch Current According to IEC 60990 (Measuring Circuit Fig. 4, TN System): <= 3.5 mA
Electrical Hookup: Terminal box
Motor Protection: Thermal overload protector (TOP) internally connected
Protection Class Assignment: I; If a protective earth is connected by the customer
This component for installation may have several local protection classes. This information relates to this component’s basic design.
The final protection class is based on the component’s intended installation and connection.
Conformity with Standards: EN 61800-5-1; CE; UKCA
Approval: CSA C22.2 No. 77 + CAN/CSA-E60730-1; EAC; UL 1004-7 + 60730-1
Model: W3G630-NR63-01; Brand: Ebm Papst; Type: Axial Fan; Motor: M3G112-GA
Phase: 3~; Nominal voltage: 400VAC; Nominal voltage range: 380...480VAC; Frequency: 50/60Hz; Speed: 1260RPM; Power consumption: 1180RPM; Current draw: 1.8A; Min. ambient temperature / Max ambient temperature: -40 / +60℃; Weoght: 24.3kg; Size: 630 mm Degree of protection: IP55
Rotor surface: Painted black; Terminal box material: PP plastic; Electronics housing material: Die-cast aluminum, painted black; Impeller material: PP plastic; Insulation class: F; Motor bearing: Ball bearing
Captain Fan specializes in the sale of ventilation and heat dissipation products and industry control accessories.
All units fully tested. Our products are widely used in industries including ventilation, air conditioning, refrigeration, heating, electrical automation, frequency variator (inverter), rail transit, air purification, new energy, etc.
Datasheet: W3G630-NR63-01
