Description
W3G800-KH94-01 – EC axial fan – AxiBlade Motor: M3G112-IAWeight 32 kg,Motor size 112 ,Size 800 mm,Rotor surface Painted black ,Terminal box material PP plastic ,Electronics housing material Die-cast aluminum, painted black ,Blade material Press-fitted sheet steel blank, sprayed with PP plastic ,Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005) ,Guard grille material Steel, coated with black plastic (RAL 9005) ,Number of blades 5 ,Airflow direction V ,Direction of rotation Clockwise, viewed toward rotor ,Degree of protection IP55 ,Insulation class “F” ,Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. ,Moisture (F) / Environmental (H) protection class H2 ,Max. permitted ambient temp. for motor (transport/storage) +80 °C,Min. permitted ambient temp. for motor (transport/storage) -40 °C,Installation position Shaft horizontal or rotor on bottom; rotor on top on request ,Condensation drainage holes On rotor side ,Mode S1 ,Motor bearing Ball bearing / (sealed) ,Technical features – Output 10 VDC, max. 10 mA – Operation and alarm display – External 24 V input (parameter setting) – Alarm relay – Integrated PID controller – Motor current limitation – PFC, passive – RS-485 MODBUS-RTU – Soft start – EEPROM write cycles: 100,000 maximum – Control input 0-10 VDC / PWM – Control interface with SELV potential safely disconnected from the mains – Thermal overload protection for electronics/motor – Line undervoltage / phase failure detection ,EMC immunity to interference According to EN 61000-6-2 (industrial environment) ,EMC circuit feedback According to EN 61000-3-2/3 ,EMC interference emission According to EN 61000-6-3 (household environment) ,Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA,Electrical hookup Terminal box ,Motor protection Thermal switch auto reset, internally connected ,Protection class assignment I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. ,Conformity with standards EN 61800-5-1 / CE ,Approval CCC / CSA C22.2 No. 77 + CAN/CSA-E60730-1 / UL 1004-7 + 60730-1 / EAC ,Comment Conformity with standard EN 60335-1 on request
Datasheet: /ds/W3G800-GT.pdf
