Description
W3G800-LV05-D1 ebm-papst EC Axial Fan with Wallring, 970x970x350mm, 400VAC, 18000m3/h, IP55, AxiBlade
Brand: ebm-papst
Part No: W3G800-LV05-03/F01
Fan Type: Axial Fan
Rated Voltage(V): 400
Size(mm): 800
Max.Air Flow(m³/h): 31740
Max.Pressure(Pa): 350
Input Power(W): 3500
Speed(RPM): 1190
Noise(dB): 86
Weight: 51.4 kg
Motor Size: 150
Rotor Surface: Painted black
Electronics Housing Material: Die-cast aluminum, painted gray
Impeller Material: PP plastic
Fan Housing Material: Sheet steel, galvanized and coated with black plastic (RAL 9005)
Material Guide Vanes: PP plastic
Guard Grille Material: Steel, coated with black plastic (RAL 9005)
Internal Diffuser Material Including Cover: PP plastic
Number Of Blades: 5
Blade Pitch: 0°
Airflow Direction: V
Direction Of Rotation: Clockwise, viewed toward rotor
Degree Of Protection: IP55
Insulation Class: “F”
Moisture (F) / Environmental (H) Protection Class: H2
Ambient Temperature Note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Max. Permitted Ambient Temp. For Motor (Transport/Storage): +80 °C
Min. Permitted Ambient Temp. For Motor (Transport/Storage): -40 °C
Installation Position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation Drainage Holes: On rotor side
Mode: S1
Motor Bearing: Ball bearing
Technical Features: Operation and alarm display with LED; External 15-50 VDC input (parameterization); Alarm relay; Integrated PI controller; Configurable inputs/outputs (I/O); MODBUS V6.3; Motor current limitation; RS-485 MODBUS-RTU; Soft start; Voltage output 3.3-24 VDC, Pmax = 800 mW; Control interface with SELV potential safely disconnected from the mains; Thermal overload protection for electronics/motor; Line undervoltage / phase failure detection
EMC Immunity To Interference: According to EN 61000-6-2 (industrial environment)
EMC Interference Emission: According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch Current According To IEC 60990 (Measuring Circuit Fig. 4, TN System): <= 3.5 mA
Electrical Hookup: Terminal box
Motor Protection: Reverse polarity and locked-rotor protection
Protection Class: I (with customer connection of protective earth)
Conformity With Standards: EN 61800-5-1; CE
Approval: CSA C22.2 No. 77 + CAN/CSA-E60730-1; EAC; UL 1004-7 + 60730-1
Datasheet: /ds/W3G800-GT.pdf
