Description
JSA4-1-G0 ITW Pancon DIP / SIP Switch, 1 Circuits, SPST, Through Hole, JS Series, 100 V
The JSA4-1-G0 is a Jumper Switch that securely switches PCB track signals with a positive contact action. It supplied in units of 1 thru 16 poles they provide an alternative to other jumpers without the need for ‘parking pins’ on the PCB or exposed bare pins and are available with ON/OFF function. Reliable switching of the gold over nickel plated phosphor bronze contacts is assured with the 4 point wiping contact design. The contacts never rub over any plastic part and every one is tested before despatch. The positive detent action ensures good shock resistance and the deep ‘V’ slots securely locate any operating probe. Jumper Switch has been designed for use on hand or flow soldering and washed PCB’s. The tight pin fit prevents any wicking.
SPST Contact Configuration
Drop in Replacement for Jumpers
Secured in the ON or OFF Setting
0.1″ Mounting Pitch
1 Thru 16 ON/OFF, Changeover and Centre-OFF Contacts
Ganged Pairs of Contacts Optional
Hard Gold-plated Wiping Contacts
Applications
Industrial
Jumper Switch on a 0.1 inch pitch. Securely switches PCB track signals with a positive contact action. Supplied in units of 1 to 16 ways, providing an alternative to other Jumper Switches without the need for parking pins on the PCB or exposed bare pins.
Switch Type DIP
Current Rating (mA) 1000
Number of Switches 4
Contact Arrangement SPST
Switch Action On / Off
Contact Material Au over Ni Plated Bronze
Termination Through hole
Sealed No
Manufacturer:ITW
Datasheet:ITW_JSA4-4-GO_1DS.pdf
