Description
ebm-papst W3G630-NP04-M1 Reliable, industrial fan High Power Cooling AC Fan EC with Wallring 400VAC, 5400m3/h, IP55, AxiBlade Axial 805x805x280mm
Weight 20,8 kg
Motor size 84
Size 630 mm
Rotor surface Painted black
Terminal box material PP plastic
Electronics housing material Die-cast aluminum, painted black
Impeller material PP plastic
Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch 0°
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class “F”
Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing / (sealed)
Technical features – Output 10 VDC, max. 10 mA – Operation and alarm display – External 24 V input (parameter setting) – Alarm relay – Integrated PID controller – Motor current limitation – PFC, passive – RS-485 MODBUS-RTU – Soft start – EEPROM write cycles: 100,000 maximum – Control input 0-10 VDC / PWM – Control interface with SELV potential safely disconnected from the mains – Thermal overload protection for electronics/motor – Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3 (household environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Thermal switch auto reset, internally connected
Protection class assignment I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation.
Conformity with standards EN 61800-5-1 / CE
Approval UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1
Nominal data
Phase 3~
Type of voltage AC
Nominal voltage in V 400
Nominal voltage range in V 380 .. 480
Frequency in Hz 50/60
Type of data definition maximum load
Speed in min-1 840
Power input in W 450
Current draw in A 0,7
Max. back pressure in Pa 115
Max. ambient temperature in °C 60
Datasheet: ebm papst W3G630NP04M1
